The Alpine Ventilation range of sub floor vent kits is an easy and low cost DIY way to remove moisture from under your house. There is a 150mm and a higher capacity 200mm version. Each consists of an axial fan with power cord, aluminium exterior vent with neck adapter, ducting, timer and clamps, duct tape and hanging tape – everything that should be required for most installations. The kits can be extended with the use of Y pieces and additional lengths of ducting. The fan can draw in dry air from outside and force out the moist air through other vents – or it can be reversed to extract the moist air and have dry air from outside replace it via other vents in the sub floor.
Sub Floor Vent Kit 200mm
$68.00
- For areas up to 200m2
- Reduce issues of mold and rising damp
- Easy DIY installation
- Reversible – fan can either exhaust the moist air or draw in fresh air from outside
- Compliant with AS3959 for bush fire zones up to BAL-40
- Extra powerful 571m3/h inline axial fan
- Extendable – add Y piece (Y668) and add ducting to increase capacity if required
Contents
- Square aluminium louvre vent with mesh and 200mm neck adapter
- 3m x 200mm d ducting
- 200mm Axial fan (with plug)
- Timer
- 30m x 48mm duct tape
- Duct hanging tape
- 3 x 200mm steel clamps
BrochureDownload